Norge
Toldfri*
- Deres linjer1 norsk linje
39.20.6200 av poly(etylentereftalat)
Norske tolddata tjekket 20. september 2026.
Kode 3920 62 · Position 3920
Dette omfatter plader, film, folie, bånd og strimler af polyethylenterephthalat (PET), som ikke er celleplast og ikke har underlag, forstærkning eller forbindelse med andre materialer, og som er ubearbejdede, kun overfladebehandlede eller kun tilskåret i kvadratisk eller rektangulær form. Selvklæbende produkter samt gulvbelægningsmaterialer og væg- og loftsbeklædning er ikke omfattet; underkoderne skelner efter tykkelse og bestemte angivne anvendelser.
For eksempel
Officiel toldtekst
Plader, ark, film, folier, bånd og strimler, af poly[ethylenterephthalat], bortset fra celleplast, ikke med underlag eller forstærket, lamineret eller på lignende måde i forbindelse med andre materialer, ubearbejdet eller kun med overfladebehandling, eller kun tilskåret i kvadratisk eller rektangulær form (undtagen selvklæbende og undtagen gulvbelægningsmaterialer og væg- og loftsbeklædning henhørende under pos. 3918)
Vælg den beskrivelse, der bedst passer til din vare.
Importtold på koderne nedenfor: 6.5%*
3 koder under denne
Prøv et kortere ord, eller søg i hele toldtariffen i stedet.
Klassificeringen afgør satsen her: fra 0.0% til 6.5%.
Salg til Norge, Storbritannien og USA
Norge, Storbritannien og USA har deres egne tariflinjer under den 6-cifrede HS-kode. Satserne nedenfor er det, deres told opkræver for varer, der ankommer fra EU. Hold varen op mod hvert lands egen ordlyd, før du stoler på en sats.
Norge
Toldfri*
39.20.6200 av poly(etylentereftalat)
Norske tolddata tjekket 20. september 2026.
Storbritannien
Fra 0.0% til 6.0%*
3920 62 12 00 Poly(ethylene terephthalate) film, of a thickness of 72 micrometres or more but not
Nordirland følger andre regler.
Britiske tolddata tjekket 20. september 2026.
USA
10.0%†
Skøn ud fra offentliggjorte amerikanske regler
3920.62.00.20 Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced
Den amerikanske importør indgiver toldangivelsen.
Amerikanske tariferingsdata tjekket 16. september 2026.
Norge opdeler den 6-cifrede kategori på sin egen måde, så det her er Norges egne linjer under den, ikke denne EU-kode. Tjek din vare mod deres ordlyd; hvad norsk told opkræver, vises pr. linje.
39.20.6200
av poly(etylentereftalat)
Beskrivelserne ovenfor er det norske toldvæsens egne tekster.
Indeholder data fra det norske toldvæsen (data.toll.no), licenseret under CC BY 4.0, tilpasset til visning.
Det, det britiske toldvæsen opkræver, når varer som disse ankommer til Storbritannien.
3920 62 12 00
Poly(ethylene terephthalate) film, of a thickness of 72 micrometres or more but not exceeding 79 micrometres, for the manufacture of flexible magnetic disks; poly(ethylene terephthalate) film, of a thickness of 100 micrometres or more but not exceeding 150 micrometres, for the manufacture of photopolymer printing plates
3920 62 19 05
Poly(ethylene terephthalate) film in rolls: - with a thickness of 0,335 mm or more but not more than 0,365 mm, and - coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm
3920 62 19 08
Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 µm, either: - only dyed in the mass, or - dyed in the mass and metallised on one side
3920 62 19 28
Non-transparent poly(ethylene terephthalate) film: -each outer layer with a thickness of 7 nm or more but not more than 80 nm, -with a tensile strength of 300 N/cm or more (ASTM D-882), -with a total thickness of 200 µm or more but not more than 350 µm, and -with a width of 600 mm or more but not more than 1 600 mm - covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites
3920 62 19 32
Transparent poly(ethylene terephthalate) film: -having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 µm or more but not more than 80 µm, whether coated with an acrylic-based organic material or not, -with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin, -with a light transmittance of more than 70 %, -with a haze value of not more than 1,3 %, -with a total thickness of 10 µm or more but not more than 350 µm, -with a width of 800 mm or more but not more than 1 600 mm
3920 62 19 38
Poly(ethylene terephthalate) film, of a thickness of not more than 12 µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm
3920 62 19 48
Sheets or rolls of poly(ethylene terephthalate): - coated on both sides with a layer of epoxy acrylic resin, - of a total thickness of 37 μm (± 3 μm)
3920 62 19 52
Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1|% of aluminium, of a thickness of not more than 300|µm and having a surface resistivity of not more than 10|000|ohms (per square) (as determined by the ASTM D 257|method)
3920 62 19 60
Poly (ethylene terephtalate) film: - of a thickness of not more than 20 µm, - coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2µm
3920 62 19 70
Poly(ethylene terephthalate) film in rolls with: -a thickness of 35 μm or more, but not more than 75 μm, -a tensile strength of 40 MPa or more in the machine direction (MD) and 200 MPa or more in the transverse direction (TD), -an elongation at break of 400 % or more in MD and 30 % or more in TD, -a heat shrinkage (in water at 90 °C/10s) in MD of 0,49 % or more, but not more than 0,51 %, -a dynamic heat shrinkage (between 55 °C and 70 °C ) in TD of not more than 20 percentage points, -a light transmittance of 85 % or more, -a haze ratio of not more than 6 %, -a surface tension of 38 mN/m or more, -a density of 1,30 g/cm³ or more, but not more than 1,34 g/cm³, -a shelf life declared by the manufacturer of not less than 12 months
3920 62 19 79
Reflective film of polyethylene terephthalate, embossed in a pyramidal pattern, with -a thickness of 0.07 mm or more but not more than 0.15 mm -a width of 762 mm or more but not more than 1350 mm
3920 62 19 85
Three-layer transparent plastic film consisting of a 15 µm fluorinated polymer (FCC) (EVA) layer, a 275 µm polyethylene terephthalate (PET) layer and a 25 µm fluorinated polymer (FCC) layer with: -a total thickness of 300 µm or more, but not more than 330 µm, -a tensile strength of 375 N/cm or more in both the longitudinal and transverse directions (ASTM D-882), -a low thermal shrinkage of 1 % or less at 150 °C for 30 minutes, -a low water vapor permeability of 2,5 g/m²•d or less, and -a high breakdown voltage of 18 kV or more and -a partial discharge voltage of 1500 VDC or more (BG/T 123542.2-2009) to be used as a protective layer on the back of photovoltaic modules
3920 62 19 99
Other
3920 62 90 10
Poly(ethylene terephthalate) film in rolls: - with a thickness of 0,335 mm or more but not more than 0,365 mm, and - coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm
3920 62 90 90
Other
Satserne gælder i Storbritannien, altså England, Skotland og Wales. For varer, der føres ind i Nordirland, kan der gælde andre regler.
Beskrivelserne ovenfor er det britiske toldvæsens egne tekster, som Storbritannien kun udgiver på engelsk.
Indeholder oplysninger fra den offentlige sektor, der er licenseret under Open Government Licence v3.0.
Kilde: UK Department for Business and Trade (data.api.trade.gov.uk).
Det, amerikansk told opkræver, når varer som disse ankommer fra EU. Den amerikanske importør indgiver toldangivelsen og betaler tolden.
3920.62.00.20
Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced, laminated, supported or similarly combined with other materials, Of polycarbonates, alkyd resins, polyallyl esters or other polyesters, Of poly(ethylene terephthalate), Metallized PET film, Gift wrap
3920.62.00.50
Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced, laminated, supported or similarly combined with other materials, Of polycarbonates, alkyd resins, polyallyl esters or other polyesters, Of poly(ethylene terephthalate), Metallized PET film, Other
3920.62.00.90
Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced, laminated, supported or similarly combined with other materials, Of polycarbonates, alkyd resins, polyallyl esters or other polyesters, Of poly(ethylene terephthalate), Other
Antidumpingtold, udligningstold, amerikanske importafgifter og toldgebyrer er ikke regnet med.
Beskrivelserne ovenfor er de amerikanske tariftekster, som USA kun udgiver på engelsk.
Kilde: den amerikanske toldtarif fra US International Trade Commission (hts.usitc.gov), public domain, og de foranstaltninger, der er offentliggjort i Federal Register.
Dette er et planlægningsskøn ud fra den amerikanske toldtarif (revisionen er vist) og de foranstaltninger, der er offentliggjort i Federal Register på den viste dato, for en forsendelse med oprindelse i EU. Det er ikke en toldangivelse, juridisk rådgivning eller en speditørs vurdering, og toldkoder.dk er ikke en amerikansk autoriseret toldspeditør. Den amerikanske importør eller dennes speditør bekræfter tarifering, oprindelse, værdi og told, før der angives.
Toldsatserne her er skøn, aflæst fra officielle EU-/danske, norske og britiske toldtarifdata og kun til orientering. Bekræft den aktuelle sats hos Toldstyrelsen, TARIC, norsk told (Tolletaten) eller den britiske Online Trade Tariff, før du angiver. Den sats, du betaler, kan også afhænge af varens oprindelsesland. Satserne er basistoldsatser: importmoms, punktafgifter, antidumpingtold samt beskyttelses- og kvoteforanstaltninger er ikke inkluderet.
Opret en gratis konto, så du kan samle de toldkoder, du har brug for, ét sted og vende tilbage til dem, når du får brug for dem.