toldkoder.dk
Log ind Opret konto

Kode 7220 20 · Position 7220

Kun koldtvalsede fladvalsede produkter af rustfrit stål, bredde < 600 mm

Denne kode dækker fladvalsede produkter af rustfrit stål, som kun er koldtvalsede og har en bredde på < 600 mm. Den specifikke underkode afhænger af produktets tykkelse og nikkelindhold.

For eksempel

  • Kun koldtvalset fladt bånd af rustfrit stål, bredde < 600 mm, tykkelse >= 3 mm, nikkelindhold >= 2,5 vægtprocent
  • Kun koldtvalset fladt bånd af rustfrit stål, bredde < 600 mm, tykkelse > 0,35 mm, men < 3 mm, nikkelindhold < 2,5 vægtprocent
  • Kun koldtvalset fladt bånd af rustfrit stål, bredde < 600 mm, tykkelse <= 0,35 mm, nikkelindhold >= 2,5 vægtprocent
Se den officielle toldtekst

Officiel toldtekst

Fladvalsede produkter af rustfrit stål, af bredde < 600 mm, kun koldtvalsede

Sådan nåede vi frem til denne kode

  1. XV
  2. 72
  3. 7220
  4. 7220 20
Vis trinnene

Vælg den 8-cifrede kode

Vælg den beskrivelse, der bedst passer til din vare.

Importtold på koderne nedenfor: 0.0%

6 koder under denne

Sammenlign de sidestillede koder

Se alle 4 koder på dette niveau

Salg til Norge, Storbritannien og USA

Det, de opkræver ved ankomst.

Norge, Storbritannien og USA har deres egne tariflinjer under den 6-cifrede HS-kode. Satserne nedenfor er det, deres told opkræver for varer, der ankommer fra EU. Hold varen op mod hvert lands egen ordlyd, før du stoler på en sats.

Norge

Toldfri

  • Deres linjer1 norsk linje

72.20.2000 ikke videre bearbeidde enn kaldvalsede

Norske tolddata tjekket 20. september 2026.

Storbritannien

Toldfri

  • Deres linjer18 britiske linjer

7220 20 21 10 Consigned from Taiwan or Vietnam

Nordirland følger andre regler.

Britiske tolddata tjekket 20. september 2026.

USA

50.0%

Skøn ud fra offentliggjorte amerikanske regler

  • Deres linjer17 amerikanske linjer
  • Indførselsdato23. september 2026

7220.20.10.10 Flat-rolled products of stainless steel, of a width of less than 600 mm, Not further

Den amerikanske importør indgiver toldangivelsen.

Amerikanske tariferingsdata tjekket 16. september 2026.

Se den norske linje

Salg til Norge

Norge opdeler den 6-cifrede kategori på sin egen måde, så det her er Norges egne linjer under den, ikke denne EU-kode. Tjek din vare mod deres ordlyd; hvad norsk told opkræver, vises pr. linje.

  • 72.20.2000

    ikke videre bearbeidde enn kaldvalsede

    Almindelig told
    Toldfri

Beskrivelserne ovenfor er det norske toldvæsens egne tekster.

Norske tolddata version 1.5/1.2, sidst tjekket 20. september 2026.

Indeholder data fra det norske toldvæsen (data.toll.no), licenseret under CC BY 4.0, tilpasset til visning.

Se de 18 britiske linjer

Salg til Storbritannien

Det, det britiske toldvæsen opkræver, når varer som disse ankommer til Storbritannien.

  • Alle 18 britiske toldlinjer under denne kode

    De har alle de samme toldsatser, som vises her.

    Almindelig told
    Toldfri

Satserne gælder i Storbritannien, altså England, Skotland og Wales. For varer, der føres ind i Nordirland, kan der gælde andre regler.

Beskrivelserne ovenfor er det britiske toldvæsens egne tekster, som Storbritannien kun udgiver på engelsk.

Britiske tolddata version v4.0.1605, sidst tjekket 20. september 2026.

Indeholder oplysninger fra den offentlige sektor, der er licenseret under Open Government Licence v3.0.

Kilde: UK Department for Business and Trade (data.api.trade.gov.uk).

Se de 17 amerikanske linjer

Salg til USA

Det, amerikansk told opkræver, når varer som disse ankommer fra EU. Den amerikanske importør indgiver toldangivelsen og betaler tolden.

  • 7220.20.10.10

    Flat-rolled products of stainless steel, of a width of less than 600 mm, Not further worked than cold-rolled (cold-reduced), Of a width of 300 mm or more, Containing more than 0.5 percent but less than 24 percent by weight of nickel, Containing more than 1.5 percent but less than 5 percent by weight of molybdenum

    Almindelig sats
    Free
    Fra EU
    50.0% Skøn ud fra offentliggjorte amerikanske regler Anvendte amerikanske positioner: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

  • 7220.20.10.15

    Flat-rolled products of stainless steel, of a width of less than 600 mm, Not further worked than cold-rolled (cold-reduced), Of a width of 300 mm or more, Containing more than 0.5 percent but less than 24 percent by weight of nickel, Other

    Almindelig sats
    Free
    Fra EU
    50.0% Skøn ud fra offentliggjorte amerikanske regler Anvendte amerikanske positioner: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

  • 7220.20.10.60

    Flat-rolled products of stainless steel, of a width of less than 600 mm, Not further worked than cold-rolled (cold-reduced), Of a width of 300 mm or more, Other, Containing less than 15 percent by weight of chromium

    Almindelig sats
    Free
    Fra EU
    50.0% Skøn ud fra offentliggjorte amerikanske regler Anvendte amerikanske positioner: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

  • 7220.20.10.80

    Flat-rolled products of stainless steel, of a width of less than 600 mm, Not further worked than cold-rolled (cold-reduced), Of a width of 300 mm or more, Other

    Almindelig sats
    Free
    Fra EU
    50.0% Skøn ud fra offentliggjorte amerikanske regler Anvendte amerikanske positioner: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

  • 7220.20.60.05

    Flat-rolled products of stainless steel, of a width of less than 600 mm, Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Of a thickness exceeding 1.25 mm, Of high-nickel alloy steel

    Almindelig sats
    Free
    Fra EU
    50.0% Skøn ud fra offentliggjorte amerikanske regler Anvendte amerikanske positioner: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

  • 7220.20.60.10

    Flat-rolled products of stainless steel, of a width of less than 600 mm, Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Of a thickness exceeding 1.25 mm, Other, Containing more than 0.5 percent by weight of nickel, Containing more than 1.5 percent but less than 5 percent by weight of molybdenum

    Almindelig sats
    Free
    Fra EU
    50.0% Skøn ud fra offentliggjorte amerikanske regler Anvendte amerikanske positioner: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

  • 7220.20.60.15

    Flat-rolled products of stainless steel, of a width of less than 600 mm, Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Of a thickness exceeding 1.25 mm, Other, Containing more than 0.5 percent by weight of nickel, Other

    Almindelig sats
    Free
    Fra EU
    50.0% Skøn ud fra offentliggjorte amerikanske regler Anvendte amerikanske positioner: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

  • 7220.20.60.60

    Flat-rolled products of stainless steel, of a width of less than 600 mm, Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Of a thickness exceeding 1.25 mm, Other, Containing less than 15 percent by weight of chromium

    Almindelig sats
    Free
    Fra EU
    50.0% Skøn ud fra offentliggjorte amerikanske regler Anvendte amerikanske positioner: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin
Vis alle 17 linjer

  • 7220.20.60.80

    Flat-rolled products of stainless steel, of a width of less than 600 mm, Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Of a thickness exceeding 1.25 mm, Other

    Almindelig sats
    Free
    Fra EU
    50.0% Skøn ud fra offentliggjorte amerikanske regler Anvendte amerikanske positioner: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

  • 7220.20.70.05

    Flat-rolled products of stainless steel, of a width of less than 600 mm, Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm, Of high-nickel alloy steel

    Almindelig sats
    Free
    Fra EU
    50.0% Skøn ud fra offentliggjorte amerikanske regler Anvendte amerikanske positioner: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

  • 7220.20.70.10

    Flat-rolled products of stainless steel, of a width of less than 600 mm, Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm, Other, Containing more than 0.5 percent by weight of nickel, Containing more than 1.5 percent but less than 5 percent by weight of molybdenum

    Almindelig sats
    Free
    Fra EU
    50.0% Skøn ud fra offentliggjorte amerikanske regler Anvendte amerikanske positioner: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

  • 7220.20.70.15

    Flat-rolled products of stainless steel, of a width of less than 600 mm, Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm, Other, Containing more than 0.5 percent by weight of nickel, Other

    Almindelig sats
    Free
    Fra EU
    50.0% Skøn ud fra offentliggjorte amerikanske regler Anvendte amerikanske positioner: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

  • 7220.20.70.60

    Flat-rolled products of stainless steel, of a width of less than 600 mm, Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm, Other, Containing less than 15 percent by weight of chromium

    Almindelig sats
    Free
    Fra EU
    50.0% Skøn ud fra offentliggjorte amerikanske regler Anvendte amerikanske positioner: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

  • 7220.20.70.80

    Flat-rolled products of stainless steel, of a width of less than 600 mm, Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm, Other

    Almindelig sats
    Free
    Fra EU
    50.0% Skøn ud fra offentliggjorte amerikanske regler Anvendte amerikanske positioner: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

  • 7220.20.80.00

    Flat-rolled products of stainless steel, of a width of less than 600 mm, Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Of a thickness not exceeding 0.25 mm, Razor blade steel

    Almindelig sats
    Free
    Fra EU
    50.0% Skøn ud fra offentliggjorte amerikanske regler Anvendte amerikanske positioner: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

  • 7220.20.90.30

    Flat-rolled products of stainless steel, of a width of less than 600 mm, Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Of a thickness not exceeding 0.25 mm, Other, Containing more than 0.5 percent but less than 24 percent by weight of nickel

    Almindelig sats
    Free
    Fra EU
    50.0% Skøn ud fra offentliggjorte amerikanske regler Anvendte amerikanske positioner: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

  • 7220.20.90.60

    Flat-rolled products of stainless steel, of a width of less than 600 mm, Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Of a thickness not exceeding 0.25 mm, Other

    Almindelig sats
    Free
    Fra EU
    50.0% Skøn ud fra offentliggjorte amerikanske regler Anvendte amerikanske positioner: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

Beregnet for en indførsel den 23. september 2026.

Amerikansk toldtarif 2026HTSRev19, sidst tjekket 16. september 2026.

Seneste ændring, vi har registreret: Revision 19 (2026), 16. september 2026.

Antidumpingtold, udligningstold, amerikanske importafgifter og toldgebyrer er ikke regnet med.

Beskrivelserne ovenfor er de amerikanske tariftekster, som USA kun udgiver på engelsk.

Kilde: den amerikanske toldtarif fra US International Trade Commission (hts.usitc.gov), public domain, og de foranstaltninger, der er offentliggjort i Federal Register.

Dette er et planlægningsskøn ud fra den amerikanske toldtarif (revisionen er vist) og de foranstaltninger, der er offentliggjort i Federal Register på den viste dato, for en forsendelse med oprindelse i EU. Det er ikke en toldangivelse, juridisk rådgivning eller en speditørs vurdering, og toldkoder.dk er ikke en amerikansk autoriseret toldspeditør. Den amerikanske importør eller dennes speditør bekræfter tarifering, oprindelse, værdi og told, før der angives.

Toldsatserne her er skøn, aflæst fra officielle EU-/danske, norske og britiske toldtarifdata og kun til orientering. Bekræft den aktuelle sats hos Toldstyrelsen, TARIC, norsk told (Tolletaten) eller den britiske Online Trade Tariff, før du angiver. Den sats, du betaler, kan også afhænge af varens oprindelsesland. Satserne er basistoldsatser: importmoms, punktafgifter, antidumpingtold samt beskyttelses- og kvoteforanstaltninger er ikke inkluderet.