Norge
Toldfri*
- Deres linjer2 norske linjer
87.08.5010 til kjøretøyer som hører under posisjon 87.01
Norske tolddata tjekket 20. september 2026.
Kode 8708 50 · Position 8708
Dette omfatter drivaksler med differentiale, også når de har andre transmissionsdele, samt bæreaksler og dele dertil. Den angivne anvendelse er industriel samling af motorkøretøjer, herunder motorkøretøjer hovedsagelig konstrueret til personbefordring, visse motorkøretøjer til godsbefordring og motorkøretøjer til specielle formål.
For eksempel
Officiel toldtekst
Drivaksler med differentiale, også med andre transmissionsdele, bæreaksler ogdele dertil, til industriel samling af: motorkøretøjer og andre motorkøretøjer, hovedsagelig konstrueret til personbefordring, henhørende under pos. 8704, motorkøretøjer til godsbefordring og til specielle formål, i.a.n..
Vælg den beskrivelse, der bedst passer til din vare.
Importtold på koderne nedenfor: 3.5–4.5%*
5 koder under denne
Prøv et kortere ord, eller søg i hele toldtariffen i stedet.
Dette er opsamlingskoden under 8708: den dækker det, som de øvrige koder nedenfor ikke dækker.
Blandt dele og tilbehør til motorkøretøjer omfatter dette de nævnte drivaksler, bæreaksler og dele dertil, som ikke er omfattet af søsterkoderne for kofangere, sikkerhedsseler, ruder, karrosseridele, bremser, gearkasser, hjul, affjedring, kølere, udstødningsdele, koblinger, styredele, airbags eller andre uspecificerede dele.
Salg til Norge, Storbritannien og USA
Norge, Storbritannien og USA har deres egne tariflinjer under den 6-cifrede HS-kode. Satserne nedenfor er det, deres told opkræver for varer, der ankommer fra EU. Hold varen op mod hvert lands egen ordlyd, før du stoler på en sats.
Norge
Toldfri*
87.08.5010 til kjøretøyer som hører under posisjon 87.01
Norske tolddata tjekket 20. september 2026.
Storbritannien
Fra 0.0% til 4.0%*
8708 50 20 15 Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive
Nordirland følger andre regler.
Britiske tolddata tjekket 20. september 2026.
USA
15.0%†
Skøn ud fra offentliggjorte amerikanske regler
8708.50.11.10 Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with
Den amerikanske importør indgiver toldangivelsen.
Amerikanske tariferingsdata tjekket 16. september 2026.
Norge opdeler den 6-cifrede kategori på sin egen måde, så det her er Norges egne linjer under den, ikke denne EU-kode. Tjek din vare mod deres ordlyd; hvad norsk told opkræver, vises pr. linje.
87.08.5010
til kjøretøyer som hører under posisjon 87.01
87.08.5090
ellers
Beskrivelserne ovenfor er det norske toldvæsens egne tekster.
Indeholder data fra det norske toldvæsen (data.toll.no), licenseret under CC BY 4.0, tilpasset til visning.
Det, det britiske toldvæsen opkræver, når varer som disse ankommer til Storbritannien.
8708 50 20 15
Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened
8708 50 20 18
Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of: -two cardan rods, -central universal joint, -central bearing with suspension in a plastic cover, -universal joints on both ends of the shaft, -slip, tube and end yokes, -of a length of 1,4 m or more but not more than 2,4 m, for use in the production of goods of Chapter 87
8708 50 20 20
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg
8708 50 20 25
Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened
8708 50 20 35
Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened
8708 50 20 50
Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (ABS) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
8708 50 20 55
Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened
8708 50 20 70
Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67,0 mm or more but not more than 84,5 mm, -3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm, - sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves
8708 50 20 75
Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees
8708 50 20 80
Specific pre-assembled or ready-to assemble sections for new mobile cranes
8708 50 20 90
Other
8708 50 35 11
Specific pre-assembled or ready-to assemble sections for new mobile cranes
8708 50 35 90
Other
8708 50 55 11
Specific pre-assembled or ready-to assemble sections for new mobile cranes
8708 50 55 20
Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (ABS) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
8708 50 55 50
Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened
8708 50 55 91
Specific pre-assembled or ready-to assemble sections for new mobile cranes
8708 50 55 99
Other
8708 50 91 10
Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (ABS) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
8708 50 91 11
Specific pre-assembled or ready-to assemble sections for new mobile cranes
8708 50 91 90
Other
8708 50 99 10
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg
8708 50 99 25
Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67,0 mm or more but not more than 84,5 mm, -3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm, - sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves
8708 50 99 35
Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees
8708 50 99 40
Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (ABS) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
8708 50 99 45
Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened
8708 50 99 50
Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened
8708 50 99 60
Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened
8708 50 99 70
Specific pre-assembled or ready-to assemble sections for new mobile cranes
8708 50 99 90
Other
Satserne gælder i Storbritannien, altså England, Skotland og Wales. For varer, der føres ind i Nordirland, kan der gælde andre regler.
Beskrivelserne ovenfor er det britiske toldvæsens egne tekster, som Storbritannien kun udgiver på engelsk.
Indeholder oplysninger fra den offentlige sektor, der er licenseret under Open Government Licence v3.0.
Kilde: UK Department for Business and Trade (data.api.trade.gov.uk).
Det, amerikansk told opkræver, når varer som disse ankommer fra EU. Den amerikanske importør indgiver toldangivelsen og betaler tolden.
8708.50.11.10
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For tractors (except road tractors), For tractors suitable for agricultural use, Drive axles with differential, whether or not provided with other transmission components
8708.50.11.50
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For tractors (except road tractors), For tractors suitable for agricultural use, Non-driving axles
8708.50.31.10
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For tractors (except road tractors), For other tractors, Drive axles with differential, whether or not provided with other transmission components
8708.50.31.50
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For tractors (except road tractors), For other tractors, Non-driving axles
8708.50.51.10
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For vehicles of heading 8703, Drive axles with differential, whether or not provided with other transmission components
8708.50.51.50
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For vehicles of heading 8703, Non-driving axles
8708.50.61.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For other vehicles, Drive axles with differential, whether or not provided with other transmission components
8708.50.65.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For other vehicles, Non-driving axles
8708.50.70.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For tractors (except road tractors), For tractors suitable for agricultural use
8708.50.75.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For tractors (except road tractors), For other tractors
8708.50.79.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For vehicles of heading 8703, Parts of non-driving axles
8708.50.81.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For vehicles of heading 8703, Other, Of cast iron
8708.50.85.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For vehicles of heading 8703, Other, Half-shafts
8708.50.89.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For vehicles of heading 8703, Other
8708.50.91.10
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For other vehicles, Parts of non-driving axles, Spindles
8708.50.91.50
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For other vehicles, Parts of non-driving axles, Other
8708.50.93.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For other vehicles, Other, Of cast iron
8708.50.95.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For other vehicles, Other, Half-shafts
8708.50.99.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For other vehicles, Other
Antidumpingtold, udligningstold, amerikanske importafgifter og toldgebyrer er ikke regnet med.
Beskrivelserne ovenfor er de amerikanske tariftekster, som USA kun udgiver på engelsk.
Kilde: den amerikanske toldtarif fra US International Trade Commission (hts.usitc.gov), public domain, og de foranstaltninger, der er offentliggjort i Federal Register.
Dette er et planlægningsskøn ud fra den amerikanske toldtarif (revisionen er vist) og de foranstaltninger, der er offentliggjort i Federal Register på den viste dato, for en forsendelse med oprindelse i EU. Det er ikke en toldangivelse, juridisk rådgivning eller en speditørs vurdering, og toldkoder.dk er ikke en amerikansk autoriseret toldspeditør. Den amerikanske importør eller dennes speditør bekræfter tarifering, oprindelse, værdi og told, før der angives.
Toldsatserne her er skøn, aflæst fra officielle EU-/danske, norske og britiske toldtarifdata og kun til orientering. Bekræft den aktuelle sats hos Toldstyrelsen, TARIC, norsk told (Tolletaten) eller den britiske Online Trade Tariff, før du angiver. Den sats, du betaler, kan også afhænge af varens oprindelsesland. Satserne er basistoldsatser: importmoms, punktafgifter, antidumpingtold samt beskyttelses- og kvoteforanstaltninger er ikke inkluderet.
Opret en gratis konto, så du kan samle de toldkoder, du har brug for, ét sted og vende tilbage til dem, når du får brug for dem.