toldkoder.dk
Log ind Opret konto

Kode 8708 50 20 · Underposition 8708 50

Endelig kode nået

Drivaksler med differentiale til industriel samling af bestemte motorkøretøjer

Dette er en komplet 8-cifret toldkode. Der er ikke flere kodevalg under den.

Denne kode omfatter drivaksler med differentiale, også aksler med andre transmissionsdele, bæreaksler og dele til disse aksler. De skal være til industriel samling af de angivne motorkøretøjer hovedsagelig konstrueret til personbefordring, motorkøretøjer til godsbefordring med de angivne motorgrænser eller motorkøretøjer til specielle formål.

For eksempel

  • En drivaksel med differentiale til industriel samling af et motorkøretøj hovedsagelig konstrueret til personbefordring
  • En drivaksel med differentiale til industriel samling af et motorkøretøj til godsbefordring med forbrændingsmotor med kompressionstænding, med stempel, med slagvolumen <= 2.500 cm³
  • En bæreaksel til industriel samling af et motorkøretøj til specielle formål
Gem
Se den officielle toldtekst

Officiel toldtekst

Drivaksler med differentiale, også med andre transmissionsdele, bæreaksler ogdele dertil, til industriel samling af: motorkoretøjer og andre motorkøretøjer, hovedsagelig konstrueret til personbefordring, henhørende under pos. 8704, motorkoretøjer til godsbefordring, med forbrændingsmotor med kompressionstænding, med stempel, med slagvolumen <= 2.500 cm³, eller med forbrændingsmotor med gnisttænding, med stempel, med slagvolumen <= 2.800 cm³ samt motorkoretøjer til specielle formål, henhørende under pos. 8705

Et sidste tjek

Sammenlign de sidestillede koder på dette niveau, før du vælger denne.

Handelsforanstaltninger, du skal være opmærksom på

Ud over den almindelige told registrerer EU disse typer foranstaltninger på denne kode. De vises kun som signaler: om en af dem gælder for dine varer, kan afhænge af, hvor de kommer fra, hvem der har produceret dem, det præcise produkt og de dokumenter, du fremlægger. Der beregnes ingen beløb her.

  • Ekstra told på varer fra visse lande

    Handelspolitiske beskyttelsesforanstaltninger, for eksempel antidumpingtold, kan gælde for varer med oprindelse i China; alle lande undtagen China.

    Dette er registreret på en mere detaljeret kode under denne, så det dækker måske ikke dine varer.

    Slå denne kode op i EU's officielle TARIC-database

  • Lavere told på varer fra visse lande

    Der findes præferencesatser for varer med oprindelse i Andorra; San Marino; Türkiye; European Union; Economic Partnership Agreements; CARIFORUM undtagen Haiti; Comoros (excluding Mayotte), Madagascar, Mauritius, Seychelles and dependencies og Zimbabwe; Botswana, Eswatini, Lesotho, Mozambique og Namibia; 51 oprindelser mere. Om du kan bruge en af dem, afhænger af oprindelsesreglerne for varerne og af den dokumentation, du kan fremlægge.

    Slå denne kode op i EU's officielle TARIC-database

  • Restriktioner og dokumentation

    Der er registreret importrestriktioner for varer med oprindelse i Iraq; Syria; Ukraine; alle lande; North Korea (Democratic People’s Republic of Korea); Libya; Russian Federation; Belarus.

    Der er registreret krav om dokumenter eller certifikater. Toldmyndighederne kan bede om:

    • Invoice declaration or origin declaration made out by any exporter on invoice or any other commercial document
    • Goods not originating from or destined to Crimea or Sevastopol (Articles 2 and 2b.1 of Council Regulation (EU) No 692/2014)
    • Movement certificate EUR.1
    • Goods not originating from or not destined for the non-government controlled areas of Ukraine in the oblasts of Donetsk, Kherson, Luhansk and Zaporizhzhia
    • Travellers' personal effects or goods of a non-commercial nature for travellers' personal use contained in their luggage (Art 10.2 of Regulation (EU) 2017/1509)
    • Goods necessary for the official purposes of diplomatic or consular missions of Member States in the DPRK or international organisations enjoying immunities in accordance with international law, or to the personal effects of their staff (Art 10.3 of Regulation (EU) 2017/1509)
    Vis alle 28 dokumentkrav
    • Transaction authorised by the competent authority of the Member State for humanitarian purposes (Art 10.4 of Regulation (EU) 2017/1509)
    • Goods other than those described in the footnotes linked to the measure
    • Substances, products, equipment, other than those falling within the scope of Regulation (EU) 2024/590
    • Exemption from prohibition for ozone-depleting substances destined to destruction or reclamation (see articles 12, 13.1(d), 13.1(e) (import) of Regulation (EU) 2024/590), and for products and equipment (see articles 12, 13.1(i) (import) of Regulation (EU) 2024/590)
    • Exemption from prohibition for products and equipment containing halons or whose functioning relies upon halons (see articles 13.1(h) (import) and 14.1(f) (export) of Regulation (EU) 2024/590)
    • Exemption from prohibition for ozone-depleting substances to be used for essential laboratory and analytical uses (articles 8, 13.1(c) (import) and article 14.1(a) (export) of regulation (EU) 2024/590), and for products and equipment (articles 11.1 and 13.1(j) (import) and 14.1(g) (export) of regulation (EU) 2024/590)
    • Import licence "controlled substances" (ozone), issued by the Commission
    • Net mass of the ozone-depleting substance multiplied by the ODP of the ozone-depleting substance(s), also when included in products and equipment
    • Declaration of net mass of ozone-depleting substance(s), when included in products and equipment
    • Licensing system registration identification number as defined in Article 17.3 (a) of Regulation (EU) 2024/590
    • Goods other than those described in Annex VIII (Luxury goods) of Reg. (EU) 2017/1509
    • The prohibitions defined in article 1ra paragraph 1 of Council Regulation (EU) No 765/2006 do not apply (see exemptions in article 1ra paragraph 3)
    • The prohibitions defined in article 1ra paragraph 1 of Council Regulation (EU) No 765/2006 do not apply (see exemptions in article 1ra paragraph 4)
    • Import authorisation by virtue of article 1ra paragraph 10 of Council Regulation (EU) 765/2006
    • Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 8f of Regulation (EU) No 765/2006)
    • The prohibitions defined in article 1ra.1 of Council Regulation (EU) No 765/2006 do not apply (see contractual exemptions in article 1ra.9f)
    • Goods other than those concerned by the prohibitions defined in article 3(a) of Regulation (EU) No 2016/44
    • Import authorisation by virtue of article 3i paragraph 3c of Council Regulation (EU) 833/2014
    • The prohibitions defined in article 3i.1 of Council Regulation (EU) No 833/2014 do not apply (see exemptions in article 3i.3aa)
    • Import authorisation by virtue of article 12b.2 of Council Regulation (EU) 833/2014
    • Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 12e of Regulation (EU) No 833/2014)
    • The prohibitions defined in article 3i.1 of Council Regulation (EU) No 833/2014 do not apply (see exemptions in article 3i.3bg)
    Slå denne kode op i EU's officielle TARIC-database

Data om EU-toldforanstaltninger version 2026-08-03-tullverket.

Eksport til Norge

Det, det norske toldvæsen opkræver, når varer som disse importeres til Norge.

  • 87.08.5010

    til kjøretøyer som hører under posisjon 87.01

    Almindelig told
    Toldfri
    Varer med EU-oprindelse
    Toldfri Du skal have dokumentation for EU-oprindelse for at bruge denne sats.

  • 87.08.5090

    ellers

    Almindelig told
    Toldfri
    Varer med EU-oprindelse
    Toldfri Du skal have dokumentation for EU-oprindelse for at bruge denne sats.

Beskrivelserne ovenfor er det norske toldvæsens egne tekster.

Norske tolddata version 1.5/1.2, sidst tjekket 3. august 2026.

Indeholder data fra det norske toldvæsen (data.toll.no), licenseret under CC BY 4.0, tilpasset til visning.

Eksport til Storbritannien

Det, det britiske toldvæsen opkræver, når varer som disse importeres til Storbritannien.

  • 8708 50 20 15

    Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened

    Almindelig told
    Toldfri
    Varer med EU-oprindelse
    Toldfri Du skal have dokumentation for EU-præferenceoprindelse for at bruge denne sats.

  • 8708 50 20 18

    Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of: -two cardan rods, -central universal joint, -central bearing with suspension in a plastic cover, -universal joints on both ends of the shaft, -slip, tube and end yokes, -of a length of 1,4 m or more but not more than 2,4 m, for use in the production of goods of Chapter 87

    Almindelig told
    Toldfri
    Varer med EU-oprindelse
    Toldfri Du skal have dokumentation for EU-præferenceoprindelse for at bruge denne sats.

  • 8708 50 20 20

    Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle<br> <br><br><br>- of a length of 1 m or more but not more than 2 m,<br> <br><br><br>- of a weight of 6 kg or more but not more than 9 kg<br>

    Almindelig told
    Toldfri
    Varer med EU-oprindelse
    Toldfri Du skal have dokumentation for EU-præferenceoprindelse for at bruge denne sats.

  • 8708 50 20 25

    Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened

    Almindelig told
    Toldfri
    Varer med EU-oprindelse
    Toldfri Du skal have dokumentation for EU-præferenceoprindelse for at bruge denne sats.

  • 8708 50 20 35

    Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened

    Almindelig told
    Toldfri
    Varer med EU-oprindelse
    Toldfri Du skal have dokumentation for EU-præferenceoprindelse for at bruge denne sats.

  • 8708 50 20 50

    Double flange bearing of 3rd generation, for motor vehicles,<br><br><br><br>- with double-row ball bearing,<br><br><br><br>- whether or not with impulse (encoder) ring,<br><br><br><br>- whether or not with antilock brake system (ABS) sensor,<br><br><br><br>- whether or not with mounted screws,<br>for use in the manufacture of goods of chapter 87

    Almindelig told
    Toldfri
    Varer med EU-oprindelse
    Toldfri Du skal have dokumentation for EU-præferenceoprindelse for at bruge denne sats.

  • 8708 50 20 55

    Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened

    Almindelig told
    Toldfri
    Varer med EU-oprindelse
    Toldfri Du skal have dokumentation for EU-præferenceoprindelse for at bruge denne sats.

  • 8708 50 20 70

    Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:<br><br>-an outer diameter of 67,0 mm or more but not more than 84,5 mm,<br><br>-3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm,<br><br>- sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle,<br><br>-spline with 21 teeth or more but not more than 35,<br><br>-bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves<br>

    Almindelig told
    Toldfri
    Varer med EU-oprindelse
    Toldfri Du skal have dokumentation for EU-præferenceoprindelse for at bruge denne sats.
Vis alle 11 linjer

  • 8708 50 20 75

    Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees

    Almindelig told
    Toldfri
    Varer med EU-oprindelse
    Toldfri Du skal have dokumentation for EU-præferenceoprindelse for at bruge denne sats.

  • 8708 50 20 80

    Specific pre-assembled or ready-to assemble sections for new mobile cranes

    Almindelig told
    Toldfri
    Varer med EU-oprindelse
    Toldfri Du skal have dokumentation for EU-præferenceoprindelse for at bruge denne sats.

  • 8708 50 20 90

    Other

    Almindelig told
    2.0%
    Varer med EU-oprindelse
    Toldfri Du skal have dokumentation for EU-præferenceoprindelse for at bruge denne sats.

Satserne gælder i Storbritannien, altså England, Skotland og Wales. For varer, der føres ind i Nordirland, kan der gælde andre regler.

Beskrivelserne ovenfor er det britiske toldvæsens egne tekster, som Storbritannien kun udgiver på engelsk.

Britiske tolddata version v4.0.1576, sidst tjekket 3. august 2026.

Indeholder oplysninger fra den offentlige sektor, der er licenseret under Open Government Licence v3.0.

Kilde: UK Department for Business and Trade (data.api.trade.gov.uk).

Før du bruger koden

Tjek de forhold, der ligger uden for koden

Koden kan være rigtig, samtidig med at det, du betaler, ændrer sig, fordi varerne kommer et bestemt sted fra, ankommer på et bestemt tidspunkt eller er omfattet af ekstra EU-foranstaltninger.

Klassificér dit eget produkt, gratis Slå de aktuelle satser og regler op
  1. Produktet og dets form Kontrollér, at dit produkt faktisk svarer til denne beskrivelse, både hvad det er lavet af, og hvilken form det ankommer i.
  2. Oprindelsesland Handelsaftaler, sanktioner og ekstra foranstaltninger kan ændre behandlingen af netop den samme kode.
  3. Aktuelle toldforanstaltninger Tjek dagens sats, eventuelle restriktioner eller bevillinger og den mængde, tolden spørger om, hos SKAT eller TARIC.

Værd at sammenligne

Koder, der ligger tæt på denne, til når selve materialet kan være et andet.

Gennemse kapitel 87

Nævnt i den juridiske tekst

Lignende varer andre steder i tariffen

Ofte forvekslet med

Toldsatserne her er skøn, aflæst fra officielle EU-/danske, norske og britiske toldtarifdata og kun til orientering. Bekræft den aktuelle sats hos SKAT, TARIC, norsk told (Tolletaten) eller den britiske Online Trade Tariff, før du angiver. Den sats, du betaler, kan også afhænge af varens oprindelsesland. Satserne er basistoldsatser: importmoms, punktafgifter, antidumpingtold samt beskyttelses- og kvoteforanstaltninger er ikke inkluderet.